Propane Forced Air MH-0060-LM10


Frame: Heavy-duty steel construction with steel base · Easy-lift handle for portability on the job site · Adjustable height angle for heat where you need it 

Components: One touch ignition and heat control for easy operation · 10-foot hose and regulator · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector - connects heater to propane tank via a supply hose

Propane: Will operate on 20 lb. cylinder

Heat Output: Variable BTUs

For use in workshops, garages, construction sites and farms with proper ventilation. 

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

Important Notes:
-Not for use in residential living areas or inadequately ventilated areas.
-Proper ventilation required during operation.
-Must be plugged into an approved standard electrical outlet for operation. 


Heat Output 40-50-60,000 BTU
Hot-Air Flow 300 CFM
AC Power 120V, 60Hz, Less than 1.0 Amps
Motor Size 1/10 HP
Fuel Propane
Fuel Consumption 1.9/2.3/2.8 lb./hr.
Required Cylinder Size 20 lb.
Maximum Operating Hours (per required cylinder size) 10.5 hours
Heating Area 1,500 sq. ft.
Adjustable Thermostat No
Adjustable Height Angle Yes
10-Foot Hose & Regulator Yes
Heat Source Propane

Weights & Dimensions

Net Weight 15.00 lbs.
Shipping Weight 19.00 lbs.
Length 18.10 in.
Width 7.10 in.
Height 13.00 in.

Request More Information