MH-0355-0MDH

Outer Casing/Design: Rugged design · Durable powder coated outer casing and side lifting handles · Lifting handles for easy loading and unloading · The unit is naturally balance to lift easily with handles · Two 10-inch solid rubber tires for mobility and easy placement

Components: Independent fan and burner controls for simple operation · Thermostat control with 20-foot cord allows for a consistent, comfortable environment and use in remote locations · 15-foot hose and regulator assembly · Air flow safety devices · Totally enclosed frame · Fully enclosed electronics · Electronic ignition · Operates as both a fresh air circulator or a heater at the touch of a switch · Super quiet, super efficient · Easy to set-up · Numerous duct options available · Direct spark ignition

Heater is a dual-fuel model - uses propane or natural gas.

For use in tent and party applications or construction sites.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

Important Notes:
-Not for use in residential living areas or inadequately ventilated areas.
-Proper ventilation required during operation.
-Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

^Natural gas regulator is required to run heater on natural gas, for gas supply pressures between 1/2 and 5 lb. of pressure (Part #68-5009). Available as an accessory.

Specifications

Heat Output	355,000 BTU
Hot-Air Flow	2,600 CFM
Fuel	Propane/Natural Gas
Fuel Consumption	16.2 lb./hr./350 cu. ft./hr.
Electrical Requirements	115V, 60Hz, 1Ø
Amps (Starting/Continuous)	21.0/9.0 Amps
Suggested Tank Size	200 lb.
Inlet Gas Pressure	11in. WC-propane/8.5in. WC-natural gas
Temperature Rise (above ambient)	190°F-propane/170°F-natural gas
Dual-fuel Heater	Yes, propane and natural gas
Heat Source	Propane/Natural Gas